Siemens 6ES7307-1KA02-0AA0 S7-300 Power Supply Spare

Overview

Siemens 6ES7307-1KA02-0AA0 S7-300 Power Supply Spare: Maintenance-Proven Reliability for Continuous Factory Uptime

The Siemens 6ES7307-1KA02-0AA0 is a regulated 10A / 24VDC power supply module designed specifically for the SIMATIC S7-300 programmable logic controller platform — one of the most widely deployed automation systems in global process and discrete manufacturing. For maintenance engineers managing aging S7-300 control cabinets, this module represents a critical line item in any structured spare parts strategy. Whether you are responding to an unplanned power failure, executing a scheduled annual overhaul, or building a preventive maintenance inventory buffer, having a verified, tested unit of the 6ES7307-1KA02-0AA0 on hand is the single most effective way to minimize control system downtime and protect production continuity.

In practice, power supply failures in S7-300 systems rarely occur in isolation. A degraded or failed PS307 module often manifests as intermittent CPU faults, unexplained I/O dropouts, or erratic HMI communication — symptoms that can be misdiagnosed as software or network issues before the root cause is identified. Experienced maintenance teams know to treat the power supply as the first checkpoint during any S7-300 fault investigation. Stocking the 6ES7307-1KA02-0AA0 as a ready-to-install spare eliminates the diagnostic delay and allows immediate swap-and-verify recovery, often restoring production within minutes rather than hours or days.

Spare Maintenance Table

Maintenance Planning for Continuous Operation

When replacing the 6ES7307-1KA02-0AA0 in a live S7-300 cabinet, a disciplined maintenance engineer does not stop at the power supply alone. The PS307 feeds the entire backplane bus, and any sustained overvoltage, undervoltage, or ripple event prior to failure may have stressed adjacent components. Before returning the system to service, it is advisable to inspect the following:

The SIMATIC S7-300 CPU module (such as the CPU 315-2 DP or CPU 317-2 PN/DP) should be checked for retained fault logs and memory integrity. A power anomaly can corrupt retentive data areas or trigger a STOP state that requires a manual restart and program reload. Alongside the CPU, the SM321 / SM322 digital I/O modules and SM331 / SM334 analog I/O modules mounted on the same rail should be visually inspected for status LED anomalies and functionally verified against the process signals they serve.

The IM 360 / IM 361 interface modules, used in multi-rack S7-300 configurations, rely on stable 24VDC bus power for inter-rack communication. A power supply replacement is an ideal opportunity to verify that rack-to-rack cabling is secure and that the interface modules are reporting healthy status. Similarly, the CP 343-1 Ethernet communication processor or CP 342-5 PROFIBUS module, if installed, should be confirmed online after power restoration, as communication processors can lose their active connection state during a power cycle and may require a brief re-initialization.

Do not overlook the 24VDC distribution fuses and terminal blocks downstream of the PS307 output. Miniature circuit breakers or blade fuses protecting individual field device circuits should be tested for continuity — a nuisance trip caused by the original power fault may have left a field loop de-energized without a visible alarm. Finally, if the cabinet includes a Siemens SITOP power supply for redundant 24VDC distribution to sensors and actuators, its output voltage and current draw should be verified to confirm it was not affected by the upstream fault event.

Site Replacement Workflow

The 6ES7307-1KA02-0AA0 is a direct form-fit-function replacement for earlier PS307 variants including the 6ES7307-1KA00-0AA0 and 6ES7307-1KA01-0AA0. The module mounts on the standard S7-300 DIN rail in the leftmost slot position and connects to the backplane bus via the integrated bus connector. No firmware update or parameter assignment is required — the PS307 is a passive power conversion device with no configurable software parameters in STEP 7 or TIA Portal.

Recommended replacement steps: (1) Isolate the cabinet from mains supply and verify zero voltage at the PS307 input terminals using a calibrated multimeter. (2) Disconnect the 120/230VAC input wiring and the 24VDC output load wiring, labeling each conductor. (3) Release the DIN rail locking tab and slide the module free. (4) Install the new 6ES7307-1KA02-0AA0, reconnect all wiring per the original termination diagram, and restore mains power. (5) Verify 24VDC output at the load terminals before re-enabling the CPU and I/O modules. (6) Confirm all S7-300 modules return to RUN state and that the process control application resumes normal operation. Document the replacement in the cabinet maintenance log with the new module serial number and installation date.

For facilities operating multiple S7-300 racks across different production lines or plant areas, maintaining a minimum of one 6ES7307-1KA02-0AA0 per five installed units is a widely adopted spare parts ratio in petrochemical, power generation, and water treatment environments. This ratio balances procurement cost against the risk of extended lead times for Siemens legacy modules, which can reach 8–16 weeks through standard distribution channels when stock is depleted.

Spare Parts Support FAQ

Q1: Is the 6ES7307-1KA02-0AA0 still in production, and how long can I expect continued supply?
The 6ES7307-1KA02-0AA0 is a mature product within the SIMATIC S7-300 lifecycle. While Siemens has transitioned its primary development focus to the S7-1500 platform, the S7-300 series remains in active industrial use globally, and spare parts supply — both new and refurbished — continues through verified supply channels and specialist industrial spare parts suppliers. KNMKS maintains verified stock of this module and can support long-term procurement planning for facilities with multi-year maintenance contracts.

Q2: What pre-shipment testing is performed on each unit?
Every 6ES7307-1KA02-0AA0 dispatched by KNMKS undergoes a full electrical output verification: input voltage acceptance across the rated 120/230VAC range, output voltage regulation check at 24VDC under load, and output current capacity confirmation at rated 10A. Units that do not meet Siemens published specifications are quarantined and not offered for sale. A test record is available upon request.

Q3: Can this module replace older PS307 variants without any hardware or software modification?
Yes. The 6ES7307-1KA02-0AA0 is backward compatible with all earlier PS307 10A variants (suffix -0AA0 and -1AA0 series). It uses the same physical form factor, identical terminal assignments, and the same backplane bus connector. No changes to the STEP 7 hardware configuration or TIA Portal project are required. The replacement is purely mechanical and electrical.

Q4: What support terms and after-sales support does KNMKS provide?
All units carry a support terms confirmed by quotation from the date of shipment. If a module exhibits any electrical fault or fails to perform to specification within the confirmed support period, KNMKS will arrange replacement or refund. Our technical team is available to assist with compatibility verification, installation guidance, and long-term spare parts planning for S7-300 and other SIMATIC platforms. Contact us at [email protected] or +86 18359268345 for procurement support.

© 2026 KNMKS. All rights reserved.
Original Source: https://knmks.com
Contact: [email protected] | +86 18359268345

Product Identification

Brand / Ecosystem

SIEMENS
Siemens

Model / Series

6ES7307-1KA02-0AA0
SIMATIC Series

Product Family

Power Supplies

Availability Status

Available on request after model and quantity confirmation

Inquiry Type

B2B RFQ, replacement inquiry and project spare-part request

Pre-Quote Check

Exact SKU, brand, series, quantity, nameplate photos and destination country are checked before quotation

Specification & Inquiry Focus

Power range

DIN rail and switching power supplies

Common needs

Voltage, current and mounting style

Project support

Control cabinet and panel-builder inquiries

Inquiry Support

• 24VDC and cabinet power selection support
• Stable power support for PLC and HMI systems
• Batch inquiry support for panel builders

What to Send Us

• Brand and exact model number: SIEMENS 6ES7307-1KA02-0AA0
• Quantity and required delivery time
• Application, replacement requirement or nameplate photo
• Destination country and shipping preference