Bently Nevada 31000-16-10-00-104-03-02 Spare Probe

Overview

Bently Nevada 31000-16-10-00-104-03-02 Maintenance-Proven Spare Part for Factory Uptime

The Bently Nevada 31000-16-10-00-104-03-02 is an original proximity probe designed for continuous vibration and position monitoring in rotating machinery applications. As a core component of the Bently Nevada 3300 and 31000 Series monitoring systems, this probe delivers the measurement accuracy and long-term reliability that maintenance engineers depend on to protect critical assets — turbines, compressors, pumps, and motors — from unplanned downtime. Stocking a verified spare of the 31000-16-10-00-104-03-02 is a fundamental step in any proactive maintenance strategy for facilities running Bently Nevada condition monitoring infrastructure.

Whether you are responding to an alarm event, executing a planned annual overhaul, or building a minimum viable spare parts inventory for your control room, the 31000-16-10-00-104-03-02 provides a direct, drop-in replacement path that eliminates the need for system reconfiguration or recalibration. Its standardized 8 mm tip diameter, defined gap voltage characteristics, and compatibility with the Bently Nevada 3300 XL proximitor/seismic transducer system make it a reliable choice for both emergency replacement and scheduled preventive maintenance cycles.

Spare Maintenance Table

Maintenance Planning for Continuous Operation

When replacing the 31000-16-10-00-104-03-02 proximity probe in the field, a thorough inspection of the surrounding measurement chain is essential to ensure the replacement restores full system integrity. The probe does not operate in isolation — its output is processed by the Bently Nevada 3300 XL Proximitor module, which converts the eddy-current signal into a calibrated DC voltage. If the proximitor has accumulated operating hours comparable to the probe, it is advisable to inspect or replace it simultaneously to avoid a secondary failure shortly after the probe swap.

The extension cable connecting the probe to the proximitor — typically a Bently Nevada 330130 or 330180 series armored extension cable — should be checked for insulation damage, connector corrosion, and continuity. A degraded extension cable is a common source of signal noise and false alarms that can be misdiagnosed as probe failure. Similarly, the proximitor power supply rail, usually drawn from the 3500 Series rack power supply module, should be verified for stable ±24 VDC output before commissioning the new probe.

For facilities running the Bently Nevada 3500 Series condition monitoring rack, the 3500/42M Proximitor/Seismic Monitor card associated with this probe channel should be inspected for alarm setpoint integrity and channel configuration. If the rack also houses a 3500/22M Transient Data Interface or a 3500/92 Communication Gateway module, verify that the channel mapping and Modbus/OPC-DA data tags remain consistent after the probe replacement to prevent data gaps in the historian or DCS.

During annual overhaul windows, it is good practice to cross-check the probe gap voltage against the original commissioning records. A gap voltage drift beyond the acceptable band — typically –10 VDC ±0.5 V for an 8 mm probe at nominal gap — may indicate shaft wear, bracket loosening, or target surface degradation rather than probe failure alone. Documenting this baseline at each overhaul cycle supports long-term asset health trending and reduces diagnostic time during future fault events.

For procurement engineers building or refreshing a minimum spare parts kit, the 31000-16-10-00-104-03-02 should be paired with at least one spare extension cable, a spare proximitor module, and a set of terminal block connectors for the associated I/O termination panel. Maintaining these components as a matched set reduces mean time to repair (MTTR) and eliminates the risk of discovering a missing component during an active shutdown.

Site Replacement Workflow

Step 1 — Isolation and Lockout: Follow site LOTO procedures. Isolate the proximitor power supply and confirm zero energy state at the probe connector before disconnecting the coaxial cable.

Step 2 — Gap Measurement and Documentation: Record the existing probe gap voltage and physical gap distance (typically 1.0–1.5 mm for an 8 mm probe) before removal. This baseline is critical for setting the replacement probe to the same operating point.

Step 3 — Probe Removal: Unthread the probe from its mounting bracket carefully. Inspect the bracket threads and target surface for wear or contamination. Clean the mounting area before installing the replacement.

Step 4 — Replacement Installation: Thread the 31000-16-10-00-104-03-02 into the bracket and adjust the gap to match the documented baseline. Reconnect the extension cable and verify connector seating and locking.

Step 5 — System Verification: Restore power to the proximitor. Confirm the gap voltage reading at the 3500 Series monitor matches the expected value. Clear any latched alarms and verify the channel is returning valid vibration data before returning the machine to service.

Step 6 — Documentation: Update the maintenance management system (CMMS) with the replacement date, new probe serial number, gap voltage at commissioning, and next scheduled inspection interval. This record supports support requests and future fault analysis.

This workflow applies equally to radial vibration and axial position probe installations and is compatible with both the legacy 3300 XL and current 3500 Series monitoring architectures, ensuring a smooth transition without system reconfiguration.

Spare Parts Support FAQ

Q1: Is the 31000-16-10-00-104-03-02 compatible with both the Bently Nevada 3300 XL and 3500 Series systems?
Yes. The 31000 Series proximity probes are designed for use with the Bently Nevada 3300 XL Proximitor and are fully compatible with the 3500 Series monitoring rack when paired with the appropriate proximitor module. Always verify the proximitor part number and gap voltage calibration curve before installation to confirm channel compatibility.

Q2: What is included with the shipment, and how is the probe tested before dispatch?
Each 31000-16-10-00-104-03-02 unit is inspected and electrically tested prior to shipment to verify output linearity and connector integrity. The probe is shipped in anti-static, impact-resistant industrial packaging with a test report. A support terms confirmed by quotation is provided from the date of shipment, covering manufacturing defects and functional failures under normal operating conditions.

Q3: Can this probe be used as a long-term replacement for discontinued or obsolete Bently Nevada probe models?
The 31000-16-10-00-104-03-02 is a current-production or tested-surplus original Bently Nevada component and serves as a direct replacement for earlier 8 mm proximity probe variants used in the same monitoring system architecture. For legacy systems where the original probe model has been discontinued, this SKU provides a compatible upgrade path without requiring changes to the proximitor, extension cable, or monitor configuration.

Q4: What is the recommended inventory strategy for facilities with multiple probe installations?
For facilities operating more than four probe channels on critical rotating equipment, maintaining a minimum of two spare 31000-16-10-00-104-03-02 units on-site is recommended. This buffer supports both emergency replacement and planned overhaul activities without relying on expedited procurement. Pairing the probe spares with a spare extension cable and proximitor module creates a complete channel replacement kit that minimizes MTTR during unplanned outages.

© 2026 KNMKS. All rights reserved.
Original Source: https://knmks.com
Contact: admin@knmks.com | +86 18359268345

Product Identification

Brand / Ecosystem

Bently Nevada
Bently Nevada

Model / Series

31000-16-10-00-104-03-02

Product Family

Sensors

Availability Status

Available on request after model and quantity confirmation

Inquiry Type

B2B RFQ, replacement inquiry and project spare-part request

Pre-Quote Check

Exact SKU, brand, series, quantity, nameplate photos and destination country are checked before quotation

Specification & Inquiry Focus

Sensor range

Photoelectric, proximity and process sensors

Common needs

Output type, distance and connector

Project support

Machine detection and replacement inquiry

Inquiry Support

• NPN/PNP, analog and digital output checking
• Connector and cable compatibility review
• Fast inquiry support for maintenance teams

What to Send Us

• Brand and exact model number: Bently Nevada 31000-16-10-00-104-03-02
• Quantity and required delivery time
• Application, replacement requirement or nameplate photo
• Destination country and shipping preference